Marion Body Works Inc. AUV Flat Bed Truck body 10'-7" x 8'-5.25"

Description

Marion Body Works Inc. AUV Flat Bed Truck body  10'-7" x 8'-5.25"  = (127" X 101.25")
This deck can be attached to any width truck or trailer frame because there are no under bed rails.
Purchase separately a pair of 2" x 1.5" angle-iron suggest 1/4" steel in a 10-ft length to either bolt or weld to the deck's frame cross members and bolt to your truck frame.
Pin Hinges for fold down side and rear walls, but panels are not included.
Please note the difference in leftside (pict #2) and rightside (pict#3) the open slots on the right side are pockets for storage of side wall gate panels (not provided).
You could manufacture your own side wall gates from 2x12 lumber, attach male pin hinges to convert from flat bed to a gated truck to haul gravel.
Units are crated 12.00' x 9.00' x 3.00'(L x W x H) Weight unkownn, estimate 750 pounds
Pictures of item are representative only, as these new old stock steel truck bodies are in crates.
Can deliver on trailer if Buyer has means to offload. Alternatively crate could be dragged off and dropped to the ground. Cost for delivering: 0 loading {{detail_product_description}} unloading plus .20 per mile  I must uncrate to transport.
Location, Martinsburg West Virginia, about 75 miles to Baltimore or Washington DC area.